Sources of AR450 or AR500 steel near Seattle?

Quoted:

If you wish to gather further information, please check our website Hunter Special Steel Co., Ltd.

How much do you require? I have some leftover AR500 from the range that you can take.

Lance

Thank you, Lance! PM sent.

I'm specifically in search of a large square or rectangle made from 3/8" AR500; the larger, the better, as long as (1) the cost is justifiable, and (2) it's manageable for two people to carry. My intention is to get holes cut at the corners or attach loops to the corners, enabling us to hang it on a frame as a mini backstop. This will also allow for rope loops to facilitate easier carrying.

Initially, I considered something more advanced, similar to the bullet-trap/swinging targets showcased in the CAD diagram at the end of this thread from another forum:

Thank you, Lance! PM sent. I'm specifically seeking a large square or rectangular piece made from 3/8" AR500; the larger, the better, as long as (1) the cost is justifiable, and (2) it's manageable for two people to carry. I plan to have holes cut at the corners or weld loops to the corners to enable hanging it on a frame as a mini backstop. This will also allow for rope loops to ease the carrying process. Initially, I considered a more complex design like the heavy-duty version of the bullet-trap/swinging targets detailed in the CAD diagram found at the end of this thread from another forum: http://www.pirate4x4.com/forum/showthread.php?t=, but I opted to keep it straightforward for now.

For additional information on ar450 vs ar500, please reach out to us for professional responses.

The primary distinction among AR450, AR400, and AR500 steel lies in the hardness each variant attains. Generally, AR400 falls within the range of 360-440 Brinell hardness, AR450 measures roughly 429-495 Brinell, while AR500 achieves between 460-544 Brinell. Another significant differentiator is the applications of these materials. Though all three types of abrasion-resistant steel boast great hardness, they differ in terms of formability and brittleness.

In scenarios where the steel necessitates high hardness along with decent formability, AR400 and AR450 are typically the choices. When extreme wear is a concern that a particular application faces, AR500 could be more suitable owing to its heightened hardness and wear resistance compared to the other two carbon alloys.

Cost considerations also influence decisions in selecting abrasion-resistant steel. Both AR450 and AR500 tend to be pricier than AR400 due to their ability to reach greater levels of hardness. Occasionally, one might opt for a more affordable alternative that may require more frequent replacements rather than choosing the higher-priced option.

If you seek more insights on electro-galvanized steel strip, don't hesitate to reach out to us.