How to Save Money When Buying Dredge Pump Casting Spares

How to Buy High-Quality Warman Pump Parts

When in the market for Warman slurry pump parts, several factors must be taken into consideration, but the most important is weight, the raw materials used in slurry pump construction:

If you are looking for more details, kindly visit SGB.

Weight 
Weight is the most commonly used and simplest way to price slurry pump parts. Casting costs are calculated as follows: For example, a slurry pump volute liner is 200 kg, according to an estimate made from a drawing. If the manufacturer reduces the weight of the A05 impeller to 150 kg, assuming that the price per kg is $6.00, a customer could save $300.00.

When you purchase Warman pump parts, it is important to remember to pay more attention to the weight of a pump than a low price. One of our Russian customers told us that he bought a 6/4 slurry pump, which cost $500.00 less than one of our models. When he received the pump, however, it weighed 200.00 kgs less than one of ours, which resulted in both lower functional life and lower efficiency.

Listed here are some standard high chrome alloy weights for a Warman A05 slurry pump impeller, volute liner, throat bush, and FPL insert:

Slurry pump impeller: BNA: 4 kg, BNA: 6.3 kg, C: 17 kg , DNA: 24kg, E: 69 kg, F: 190 kg, G: 373 kg, G: 490 kg, GAM: kg.

Slurry pump volute liner: BNA: 11.5 kg, BNA: 14.1 kg, CNA: 36 kg, D: 66.5 kg, E: 120 kg, F: 282 kg, G: 375.5 kg, G: 611 kg, G: kg, H: kg.

Slurry pump throatbush: E: 48.4 kg, F: 117.5 kg, G: 188 kg, G: 250 kg, G: 390 kg, H: 496 kg.

Slurry pump frame plate liner insert: BNA: 3.5 kg, BNA: 4.3 kg, C: 7 kg, D: 17 kg, E: 31.6 kg, F: 84 kg, G: 164 kg, G: 221.5 kg, G: 370 kg, H: 400 kg.

Raw materials used in slurry pump construction  
The raw materials used to construct a slurry pump include chromium (Cr), copper (Cu), manganese (Mn), nickel (Ni), silicon (Si), iron (Fe), and molybdenum (Mo). Products are coded by element and the percentage present in the allow. An example is high chrome alloy A05(KmTBCr26). Looking at the formula, it indicates that this alloy content should not less than 26% chromium and 5% nickel content. Nickel and chromium are the key metallic elements of the A05. If the chromium present was 20% or contained very little nickel or no nickel at all, then the hardness decrease, as would the price. Though this may sound like a good way to save money, eventually, it is lost in replacements, as it is likely to undergo wear and tear much faster. The standard high chrome alloy hardness should be between 56HRC to 60HRC for the best results.

There is an old saying, “You get what you pay for.” A low price may be appealing, but buyer beware. You may be sacrificing quality for a low price. Do your homework and compare product specs before making a purchase. If you have questions or want a free consultation, contact our team of experts today!

If you are looking for more details, kindly visit Dredge Pump Casting Spares.

When choosing spare parts for pumps, it is important to consider the following factors:
1.Compatibility: Make sure the spare parts are compatible with the make and model of the pump.

2.Quality: Choose spare parts from reputable manufacturers that use high-quality materials and meet industry standards.

3.Functionality: Make sure the spare parts will perform the required function and meet the specific application needs.

4.Price: Compare prices from different suppliers to ensure you are getting the best value for your money.

5.Availability: Choose a supplier who can provide the spare parts quickly and reliably.

6.Technical Support: Choose a supplier who can provide technical support and assistance with installation and maintenance.

7.It is also recommended to have a spare parts inventory on hand to minimize downtime in case of unexpected failure.

There are two major considerations when selecting a slurry pump: the impeller and the casing. The impeller should have a large enough passageway so that the solid particles, no matter their size, can pass through without clogging. The casing of the pump, which handles the pressure, should have larger gaps between the impeller and the cut-water tongue, to reduce wear and prevent large solid particles from getting stuck.It’s important you take note of the materials of construction, this includes metal and/or rubber pump lines and metal casing. A metal and/or rubber pump liner will combat erosion from the solid particles. The metal casing will resist erosion caused by the increased pressure and circulation.

1. Equal OEM Quality  
Hedunpumps provides perfect replacement products for your slurry pumps and spare parts, and guarantee that, first of all, our products is fully interchangeable with some famous brands product dimensionally. Secondly, Hedun products perfectly replaces with OEM products in qualitatively and even supplies more Superior performance in some case.
2.Competitive Price
Whatever you purchase wear parts for your slurry pump or buy a whole complete Heavy duty slurry pumps. Price will be one of the most important aspect that you have to consider. Compared with the very expensive original equipments and OEM parts, Hedunpumps could provide competitive price with high quality to you.
3.Short Delivery Time
In economic globalization today, time has become another important factor we have to consider in purchasing process. Special in Mining industry, time is money. Do you still remember how anxious you feel when your slurry pump parts get wear out but supplier can not delivery the parts to your processing plant on time? Now Hedunpumps make them within your reach by our powerful storage and logistic capability.

The company is the world’s best Horizontal Desulphurization Pump supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.