Sign in
Guest Blogging Hub for Agriculture & Rural Innovation | Agriculture01
Guest Blogging Hub for Agriculture & Rural Innovation | Agriculture01
Your Position: Home - Other Plastic Building Materials - Edge Banding - MechMate CNC Router Forum
Guest Posts

Edge Banding - MechMate CNC Router Forum

Jun. 30, 2025

Edge Banding - MechMate CNC Router Forum

Irfan there are a couple of questions that I would like to ask you about first?

1.the volume of edging that you are going to do?
2. what is the max thickness that you would eventually edge ( thickness of edging )?
3.what is the longest board that you are going to edge?
4.the space that you have available to work in your workshop?
5.the size of the roll of edging that you are going to use?

There are other options also, what I do like is that one can do curved edges and that will be the only reason i would buy one of those.
I have two edgebinders in my shop the one is a small machine ( will post picks on monday )that you have to use manual presure to push the board trough the wheel that spread the glue.(nice machine easy to fix )

The other machine is the big one where you put the board in the one side and it comes out the other side with all sides trimmed.(nice to have sh.t to fix lot to go wrong)

The reason for the questions:

1.If you would be doing a lot of edging that hand held machine can be heavy, you are using a machine with glue that have a melting temp of wel over a 190 deg and trust me I know that glue comes on your skin it takes it off.It is also much better to have control over your board than the machine which moves and is hot.If you wan`t to buy it make a better table for it so it will be stationary, you should have c cannel left from the MM so build one ( you will see on the pic`s).

2.you are using .45 mm thick edging now but would like to do thicker also and if you do thicker edging will it cut it once you are finished with the edge side .

3.it is much easyer to push a board than handle a machine have a table on both sides the same hight as the edgebinder(board can go nowhere)

the roll of edging is also heavy and if it is on the machine and it decides to start rolling of in all directions you have a machine in your hand
and edging all over the floor.

don`t get me wrong there should be pro`s and con`s with this binder but my input would be to have your machine stationary.

hope it helps 1.the volume of edging that you are going to do?

upto 20 furnitures a day - starting out with 5 per day initially based on orders

2. what is the max thickness that you would eventually edge ( thickness of edging )?

at present speculating to 1 mm max

3.what is the longest board that you are going to edge?

max 72 inch

4.the space that you have available to work in your workshop?

very less you can see my tread for the pics its 20x20 and already have 2 cnc there

5.the size of the roll of edging that you are going to use?

I will cut pieces to length before using it


There are other options also, what I do like is that one can do curved edges and that will be the only reason i would buy one of those.

have a lot of curved edges - like the one you saw on the computer table I built.


1.If you would be doing a lot of edging that hand held machine can be heavy, you are using a machine with glue that have a melting temp of wel over a 190 deg and trust me I know that glue comes on your skin it takes it off.It is also much better to have control over your board than the machine which moves and is hot.If you wan`t to buy it make a better table for it so it will be stationary, you should have c cannel left from the MM so build one ( you will see on the pic`s).

Actually the machine comes with a table for mounting it stationary.

2.you are using .45 mm thick edging now but would like to do thicker also and if you do thicker edging will it cut it once you are finished with the edge side .

I have asked for a manual cutter and trimmer.

kindly let me know your supplier for the PVC -pre glued tape - at what temperature does the glue melt?

RGDS
Irfan

For more Thin PVC Edge Bandinginformation, please contact us. We will provide professional answers.

Additional reading:
The Importance of Quality Insulation in New Construction

If you want to learn more, please visit our website PVC Edge Banding for MDF.


Choosing the Perfect Skirting Boards for Your Home - Trimetix

Lituo supply professional and honest service.

Comments

0 of 2000 characters used

All Comments (0)
Get in Touch

  |   Transportation   |   Toys & Hobbies   |   Tools   |   Timepieces, Jewelry, Eyewear   |   Textiles & Leather Products   |   Telecommunications   |   Sports & Entertainment   |   Shoes & Accessories   |   Service Equipment