Caigle Science,Solid Paste Series,Glue Paste ...

Precautions for the use of foaming paste printing materialsTime of issue : - 11-12

It is suitable for weaving cotton fabric, knitted fabric, taping cotton, T-shirt and other garment printing. It has the characteristics of soft touch, strong tensile strength, and uniformity of three-dimensional polyurethane foam after the short term tempering process to maintain the growth of the pattern. For the big guys detailed introduction to the next polyurethane foam pulp instructions and common problems.

If you are looking for more details, kindly visit our website.

How to reduce the number of prints to improve efficiency when printing with gum paste?Time of issue : - 11-12

Glue paste printing, according to the characteristics of the fabric, ordinary cotton fabric generally need to print 3 times to achieve a better printing effect, especially some threaded cloth, sweatshirt cloth and other fabrics with deeper grain, that the number of printing is more than 3 times. In order to achieve the purpose of reducing the number of printing times and improving efficiency, we can add thick board pulp inside the glue pulp, or directly print with thick board pulp, which can achieve the effect of reducing the number of printing times. Sweatshirt fabric and other fabrics with deeper grain, 3 times can achieve the effect of printing flat and glossy.

Some small knowledge about the printing material process, do you understandTime of issue : - 11-12

Screen method is to adjust the color of the screen to adjust the color of the picture, usually on the screen through the color menu to select or adjust the color. This approach is very useful when matching or starting to color, is a common method of color mixing designers

Application of high fastness nylon thick board pulp and water-based three-dimensional thick board pulpTime of issue : - 11-12

This product is easy to operate, in order to ensure the printing effect, it is generally recommended to use a flat screen (ordinary screen) directly, without making a thick version; ordinary screen printing 1 mm high as long as the printing 6-8 times, the screen is surrounded by hard padding, the distance between the screen and the table is about 1-1.5 MM can be, in the use of thick screen printing, after the first printing needs to be dry before the second printing.

Perfect solution for poor fastness of thick board pulp garment printingTime of issue : - 11-12

The fabric may contain polyester components, or the fabric is smooth, and the thick board pulp for printing cotton is used instead of nylon thick board pulp. Use nylon thick board pulp need to add 1-1.5 curing agent

If you are looking for more details, kindly visit Refine&Top.

About screen printing materials?Time of issue : - 11-20

Silk screen: the uniformity of warp and weft, tensile strength, surface finish are higher than cotton screen, the disadvantage is that the elongation is too large, easy to age and deteriorate, the effect of light resistance is not good, long-term exposure to light is very easy to become brittle...

Color difference problem in screen printing?Time of issue : - 11-20

Color difference The difference between the color of a pattern on the printed fabric and the color of a pattern on the printed fabric or the color of a pattern on the printed fabric is called color difference. Color difference is caused by the difference in hue, brightness, purity of the integrated results...

What is the problem of color transfer in screen printing?Time of issue : - 11-20

The printing process produces serious "side dirt", so that the edge of the fabric or the edge of the fabric outside the printing table piled up more color paste, after printing the printing plate pattern and it meets or adjacent, color paste through the pattern mesh into the plate so that the color paste discoloration...

Printing glue / transparent primer / white glue: the clothing industry has developed rapidly. With its unique effect and low cost, it is enduring in the printing industry. Its characteristics are mainly reflected in the following aspects: 
1、 It can be used for printing cotton cloth, TC cloth, blended cloth, case and bag cloth, denim, waterproof nylon cloth and other materials.
 
2、 The water-based material has strong covering power and good coloring effect, which can easily reflect brilliant colors on the strong objects of the deep bottom cloth.
 
3、 Soft hand feel, good elasticity, smooth and flat printing pattern, etc.
 
4、 Good firmness, not easy to fall off. Waterproof nylon glue can be used for denim and waterproof nylon cloth printing after adding proper amount of catalyst.
 
5、 The use of printing adhesive / transparent primer / white adhesive has the advantages of less investment, low cost, broad market and great potential.
 
Of course, in order to do a good job of printing glue / transparent primer / white glue, we must first understand the relevant printing materials. With a certain understanding of the material, we need to master a set of more complete printing techniques, so that we can wait until the better printing effect.
 
Here are some questions to pay attention to when printing.
 
1. According to different materials or different requirements, choose accurate and appropriate printing size. For example: for printing on general cotton cloth or blended cloth, it is better to select general elastic white glue or transparent pulp as the base slurry; for printing on nylon cloth or denim, nylon glue or transparent pulp should be used. If special treatment is needed, waterproof nylon glue or transparent pulp should be used.
 
2. Before using the glue for printing, if the glue is placed for a long time, it should be diluted with water (the amount of water should not be more than 5%). Then it should be filtered with 150 mesh screen yarn, and then printed, so as to get a softer and smoother effect.
 
3. When printing with glue, it is better to use 100-200 mesh screen, and the screen spacing is kept at 3mm-5mm for hanging printing.
 
4. If it is found that the printing pattern is too hard, 5% - 10% water-based softener can be added to the glue for printing or other more suitable water-based paste can be selected. It is better to heat the printed matter at 150 ℃ for 2-3 minutes after natural drying for 24 hours, so as to obtain better firmness.
 
5. When printing with glue paste, pay attention to the proportion of glue paste and transparent paste. Generally for light color printing, the proportion of white glue paste and transparent paste is 6:4 or 5:5; if it is dark color printing, the proportion should be adjusted to 4:6 or 3:7 appropriately, but it is necessary to pay attention to stickiness.
 
6. If the printed matter needs washing resistance or other special treatment, it can be printed by adding 1% - 3% A02 nylon bridging agent or zj-80w anti stick crosslinking agent below 3%, and then it can be baked at 150 ℃ for 2-3 minutes after being dried for 24 hours, and then its fastness can be tested.
 
7. When using glue paste for printing, if the printing pattern is not bright enough, in addition to properly adjusting the proportion of white glue paste and transparent paste, a layer of transparent paste or glossy paste can also be covered on the printing pattern.

The company is the world’s best Special Effect Printing Paste(fa,de,ru) supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.